China 1GD498103 Drive shaft Inner CV Joint For VW BoraGolfJattaPassatPoloTiguan, For Audi #8 screw shaft diameter

Model: A1 (8X1, 8XK), POLO (6R, 6C), GOLF VII Variant (BA5, BV5), CADDY III Box (2KA, 2KH, 2CA, 2CH), GOLF V Variant (1K5), PASSAT (3A2, 35I), GOLF VI (5K1), BORA Variant (1J6), GOLF III (1H1), GOLF VI Variant (AJ5), JETTA III (1K2), JETTA II (19E, 1G2, 165), BORA (1J2), PASSAT CC (357), GOLF V (1K1), TIGUAN (5N_), JETTA IV (162, 163), GOLF VII (5G1, BQ1, BE1, BE2), GOLF I Cabriolet (155)
Year: 2
Warranty: 1 Year
Car Model: For VW Bora/Golf/Jatta/Passat/Polo/Tiguan
Product name: CV Joint Kit (Inner ball joint)
OE Number: 1GD498103
Car model: For VW Audi
Lubrication: with grease lubrication
Joint Type: CV Joint, Disc Joint
Size: Matching with standard original vehicle
Included: 1pc of CV joint and cv boot and cv joint grease and screws
Sample: Avaiable 7 days
MOQ: 300pcs 20-30days
Application: Cars after sales service
Packaging Details: Neutral packaging/Customized packaging
Port: ZheJiang port, China

Please tell us what products or what brand car you interested in more? And what is the OE Number of your car model?
We would like to send you our catalog and recommend the suitable parts for your model.

1GD498103 Inner Drive shaft CV Joint Disc Joint For VW Bora/Golf/Jatta/Passat/Polo/Tiguan, For Audi

Product nameCV Joint, Disc Joint(Inner ball joint)(Manual)
OE numberGM755
Car ModelFor VW Bora/Golf/Jatta/Passat/Polo/Tiguan;
For Audi
One set including1pc of outer CV Joint1pc of cv joint grease
1pc of CV boot
Fitting positionTransmission End
SizeStandard, matching with the original vehicle
ApplicationSuitable for cars after sales service
Solve the problem:

  • Poor comfort
  • Over bend tilt
  • Abnomal noise
  • Driving jitter
  • Oil Leaking
  • Features:
  • Matching with the size of the original vehicle.
  • Improve subversion and eliminate noise.
  • Safe,Fixed,Stable,Durable,Quality assurance.
  • Proprietary engineering processes ensure that all meet O.E. form, fit and function.
  • High-quality grease withstands high-temperature and pressure extremes.
  • Splines are chased to ensure proper fit of the axle into the mating hub and transmission, eliminating installation hassles.
  • Inner CV joint
  • Inner CV Joint Tripod BearingIt uses 3 rolling bearings that slide in the 3 tracks of CZPT cosing, thus adapting to the change in length of the drive shaft while driving.
  • CV joint dust bootDust boot made of resin or neoprene rubber features high tensile strength, Servo Motor Drive Single Disc Mebrane Rigid Coupling Shaft Collar Coup Link Lk18 Pdf oi; and corrosion resistance, which ensure no aging and crack even form -60℃ to 200℃.
  • Strong resistance to acid and alkali corrosion, even over a wide temperature range from -253℃ to 500℃.
  • AdvantagesHigh precision
    1. Size of the oil seal of the outer ball cage is matching the original vehicle’s ball cage oil seal files.
    2. Stardard Internal and external splines and thread size easy to install.
    3. Stardard inner circlip of the inner spline. The stardard width of the circlip makes the movement of the ball cage on the half shaft after loading normally.
    4. The inner spline rotation is flexible.
    5. Good quiality materials and exquisite heat treatment performance ensure the product quality.
    6. Perfect welding:uniform, standard thickness,sureface without crease and good linearity.
    Packaging & Shipping
    1 set including1pc of inner CV Joint
    2pcs of cv boot clamp 1pc of cv joint grease
    Package1pc/box1. Neutral packing,or SPADD Brand box 2. According to customer’s requirement.
    SampleAvaiable;Delivery time 7days;Shipped by Express to your door( freight is charged).
    MOQ (Bulk order)MOQ: 100PCS;Delivery time: 20-30days;Shipped by sea or air to your nearest port from ZheJiang , China.

    PaymentTT, Trade Assurance on alibaba, PayPal, Western Union
    OEM and ODMPackage, Brand Logo
    Manufacturter and tradeOne-Stop Souring, Over 25 years Professional Car Accessories Supplier
    Fast reply and on timeWithin 24 hours.

    Similar Products Other CV joints for reference. (Please check your car model or OE number before purchase).

    Company Information
    FAQ1. Is the product fit to your car model?
    Please check if the parts are suitable for your model before purchase.
    Or please tell us your Car Model and OE Number, and tell us the product name.
    2. What you can supply to me? We could supply all kinds of auto spare parts and accessories. Besides ,we provide OEM service, shipping service and QC service as well to make sure you get ONE-STOP purchase process from us.
    3. Can you customize the products as per our request? Yes, we do OEM and ODM. We could make the product suggestion based on your idea and budget.
    4. How to get a sample from you? All samples will be free if unit cost under 20USD,but the freight should be on your side. If you have express account like DHL,UPS etc we will send you directly, if you don’t have you can send express cost to our paypal account, any sample cost could be returned when you make order.
    5. What’s your payment term? We usually doing 30% deposit and 70% balance against copy of B/L by T/T, We also accept L/C ,D/P if total amount over $30000.

    Welcome to your inqury now and built a long cooperatitive relationship with our professional service.

    Screw Sizes and Their Uses

    Screws have different sizes and features. This article will discuss screw sizes and their uses. There are two main types: right-handed and left-handed screw shafts. Each screw features a point that drills into the object. Flat tipped screws, on the other hand, need a pre-drilled hole. These screw sizes are determined by the major and minor diameters. To determine which size of screw you need, measure the diameter of the hole and the screw bolt’s thread depth.

    The major diameter of a screw shaft

    The major diameter of a screw shaft is the distance from the outer edge of the thread on one side to the tip of the other. The minor diameter is the inner smooth part of the screw shaft. The major diameter of a screw is typically between two and sixteen inches. A screw with a pointy tip has a smaller major diameter than one without. In addition, a screw with a larger major diameter will have a wider head and drive.
    The thread of a screw is usually characterized by its pitch and angle of engagement. The pitch is the angle formed by the helix of a thread, while the crest forms the surface of the thread corresponding to the major diameter of the screw. The pitch angle is the angle between the gear axis and the pitch surface. Screws without self-locking threads have multiple starts, or helical threads.
    The pitch is a crucial component of a screw’s threading system. Pitch is the distance from a given thread point to the corresponding point of the next thread on the same shaft. The pitch line is one element of pitch diameter. The pitch line, or lead, is a crucial dimension for the thread of a screw, as it controls the amount of thread that will advance during a single turn.

    The pitch diameter of a screw shaft

    When choosing the appropriate screw, it is important to know its pitch diameter and pitch line. The pitch line designates the distance between adjacent thread sides. The pitch diameter is also known as the mean area of the screw shaft. Both of these dimensions are important when choosing the correct screw. A screw with a pitch of 1/8 will have a mechanical advantage of 6.3. For more information, consult an application engineer at Roton.
    The pitch diameter of a screw shaft is measured as the distance between the crest and the root of the thread. Threads that are too long or too short will not fit together in an assembly. To measure pitch, use a measuring tool with a metric scale. If the pitch is too small, it will cause the screw to loosen or get stuck. Increasing the pitch will prevent this problem. As a result, screw diameter is critical.
    The pitch diameter of a screw shaft is measured from the crest of one thread to the corresponding point on the next thread. Measurement is made from one thread to another, which is then measured using the pitch. Alternatively, the pitch diameter can be approximated by averaging the major and minor diameters. In most cases, the pitch diameter of a screw shaft is equal to the difference between the two.

    The thread depth of a screw shaft

    Often referred to as the major diameter, the thread depth is the outermost diameter of the screw. To measure the thread depth of a screw, use a steel rule, micrometer, or caliper. In general, the first number in the thread designation indicates the major diameter of the thread. If a section of the screw is worn, the thread depth will be smaller, and vice versa. Therefore, it is good practice to measure the section of the screw that receives the least amount of use.
    In screw manufacturing, the thread depth is measured from the crest of the screw to the root. The pitch diameter is halfway between the major and minor diameters. The lead diameter represents the amount of linear distance traveled in one revolution. As the lead increases, the load capacity decreases. This measurement is primarily used in the construction of screws. However, it should not be used for precision machines. The thread depth of a screw shaft is essential for achieving accurate screw installation.
    To measure the thread depth of a screw shaft, the manufacturer must first determine how much material the thread is exposed to. If the thread is exposed to side loads, it can cause the nut to wedge. Because the nut will be side loaded, its thread flanks will contact the nut. The less clearance between the nut and the screw, the lower the clearance between the nut and the screw. However, if the thread is centralized, there is no risk of the nut wedgeing.

    The lead of a screw shaft

    Pitch and lead are two measurements of a screw’s linear distance per turn. They’re often used interchangeably, but their definitions are not the same. The difference between them lies in the axial distance between adjacent threads. For single-start screws, the pitch is equal to the lead, while the lead of a multi-start screw is greater than the pitch. This difference is often referred to as backlash.
    There are two ways to calculate the pitch and lead of a screw. For single-start screws, the lead and pitch are equal. Multiple-start screws, on the other hand, have multiple starts. The pitch of a multiple-start screw is the same as its lead, but with two or more threads running the length of the screw shaft. A square-thread screw is a better choice in applications requiring high load-bearing capacity and minimal friction losses.
    The PV curve defines the safe operating limits of lead screw assemblies. It describes the inverse relationship between contact surface pressure and sliding velocity. As the load increases, the lead screw assembly must slow down in order to prevent irreversible damage from frictional heat. Furthermore, a lead screw assembly with a polymer nut must reduce rpm as the load increases. The more speed, the lower the load capacity. But, the PV factor must be below the maximum allowed value of the material used to make the screw shaft.

    The thread angle of a screw shaft

    The angle between the axes of a thread and the helix of a thread is called the thread angle. A unified thread has a 60-degree angle in all directions. Screws can have either a tapped hole or a captive screw. The screw pitch is measured in millimeters (mm) and is usually equal to the screw major diameter. In most cases, the thread angle will be equal to 60-degrees.
    Screws with different angles have various degrees of thread. Originally, this was a problem because of the inconsistency in the threading. However, Sellers’s thread was easier to manufacture and was soon adopted as a standard throughout the United States. The United States government began to adopt this thread standard in the mid-1800s, and several influential corporations in the railroad industry endorsed it. The resulting standard is called the United States Standard thread, and it became part of the ASA’s Vol. 1 publication.
    There are two types of screw threads: coarse and fine. The latter is easier to tighten and achieves tension at lower torques. On the other hand, the coarse thread is deeper than the fine one, making it easier to apply torque to the screw. The thread angle of a screw shaft will vary from bolt to bolt, but they will both fit in the same screw. This makes it easier to select the correct screw.

    The tapped hole (or nut) into which the screw fits

    A screw can be re-threaded without having to replace it altogether. The process is different than that of a standard bolt, because it requires threading and tapping. The size of a screw is typically specified by its major and minor diameters, which is the inside distance between threads. The thread pitch, which is the distance between each thread, is also specified. Thread pitch is often expressed in threads per inch.
    Screws and bolts have different thread pitches. A coarse thread has fewer threads per inch and a longer distance between threads. It is therefore larger in diameter and longer than the material it is screwed into. A coarse thread is often designated with an “A” or “B” letter. The latter is generally used in smaller-scale metalworking applications. The class of threading is called a “threaded hole” and is designated by a letter.
    A tapped hole is often a complication. There is a wide range of variations between the sizes of threaded holes and nut threads, so the tapped hole is a critical dimension in many applications. However, even if you choose a threaded screw that meets the requisite tolerance, there may be a mismatch in the thread pitch. This can prevent the screw from freely rotating.

    China 1GD498103 Drive shaft Inner CV Joint For VW BoraGolfJattaPassatPoloTiguan, For Audi     #8 screw shaft diameterChina 1GD498103 Drive shaft Inner CV Joint For VW BoraGolfJattaPassatPoloTiguan, For Audi     #8 screw shaft diameter
    editor by czh 2023-03-03

    Leave a Reply

    Your email address will not be published. Required fields are marked *