China OEM Simostep Stepper Motor 4 Nm Shaft Diameter 12mm arrow shaft screw

Product Description


1FL3042-0AC31-0BK0
SIMOSTEP STEPPER MOTOR, 4 NM SHAFT DIAMETER 12MM

Detailed Photos

 

SIMOSTEP STEPPER MOTOR, 4 NM SHAFT DIAMETER 12MM

Product Description

item

value

Place of CHINAMFG

Germany 

Brand Name

CHINAMFG

Model Number

1FL3042-0AC31-0BK0

Condition

100% original

MOQ

1 Piece

Company Profile

ZheJiang CZPT Industrial Technology Co., Ltd set up since 1997, with 20 years development, we become 1 of the best companies in the industry for mechanical and electrical products system integration, logistics service and investment. The company has set up 21 subsidiaries located in southern, central, eastern and northern China, .

The products categories include:

1, Transmission Products: High and low voltage electric motors, geared motors, gear boxes, bearings, inverter and complete electrical cabinets

2, Automation Products: Automation systems, motion control, low voltage control products and systems, sensor and communication products,

3, Power distribution Products: Low-voltage power distribution products, medium voltage circuit breaker, intelligent building system and equipment.

4, Machinery components.

Count on our 20 years industry experiences. ZheJiang CZPT Industrial Technology Co., Ltd give you one-stop industrial products sourcing, procurement, system integration and services, satisfy your different needs in the industry.

We are looking CHINAMFG to cooperating with you.
 

Office Block

Warehouse Block

FAQ

1. Who are we?
We are based in HangZhou, China, start from 2015,sell to DomesticMarket(89.00%),Eastem Europe(3.00%),SoutheastAsia(2.00%),SouthAmerica(2.00%),Northern Europe(1.00%),Western Europe(1.00%),Oceania(1.00%),NorthAmerica(1.00%) There are total about 11-50 people in our office.

2. How about the after services and technical?
We offer 24 hours online customer service and The technical support and guidance online.

3. How can we guarantee quality?
Always a pre-production sample before mass production,Always final Inspection by Take photo and video as your demands before shipment:We provide you 3 months guarantee for used and 1 YEAR warranty for new.

4. How about the packing when they are sent out?
In order to save the freight and reduce your budget, we choose the packaging forenvironment-friendly. We use foam board with 3 cm thick to fill in all around the box insideto protect parts, then use carton to pack the parts, but if thev are too heavy, we wilcustomized the wooden box for them.

5. What terms services can we provide?
1:Payment: T/T, Paypal, Western union, etc
2:Express: UPS,DHL,FEDEX,TNT,EMS ,etc

  /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Industrial
Speed: Variable Speed
Number of Stator: Three-Phase
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

screw jack

What advancements in screw jack technology have improved efficiency and reliability?

Advancements in screw jack technology have led to significant improvements in efficiency and reliability. Here are some key advancements that have contributed to these improvements:

  • High-Efficiency Ball Screws: Traditional screw jacks often used trapezoidal or square threads, which had relatively lower efficiency due to higher friction. However, the introduction of high-efficiency ball screws in screw jack designs has greatly improved efficiency. Ball screws offer low friction and higher efficiency, resulting in reduced power consumption and improved overall system efficiency.
  • Improved Lubrication Systems: Proper lubrication is crucial for the smooth operation and longevity of screw jacks. Advancements in lubrication systems, such as the use of self-lubricating materials, improved lubricants, and better sealing mechanisms, have enhanced the reliability and maintenance intervals of screw jacks. These advancements minimize wear, reduce friction, and ensure consistent performance over extended periods.
  • Materials and Coatings: The use of advanced materials and coatings has significantly improved the durability and reliability of screw jacks. Components made from high-strength alloys, such as stainless steel or hardened steel, can withstand higher loads and resist wear. Additionally, coatings like zinc plating or epoxy coatings provide corrosion resistance, extending the lifespan of screw jacks in challenging environments.
  • Integrated Sensors and Feedback Systems: Integration of sensors and feedback systems in screw jacks has improved their reliability and control. Position sensors, load sensors, and torque sensors can be integrated into screw jacks to provide real-time feedback and monitoring. This enables precise positioning, load measurement, and the ability to detect and respond to abnormal operating conditions, ensuring safe and reliable operation.
  • Automation and Control Integration: The integration of screw jacks with advanced automation and control systems has improved efficiency and reliability. Motorized screw jacks can be integrated with programmable logic controllers (PLCs) or computer numerical control (CNC) systems, enabling precise and synchronized movements, remote operation, and automation. This integration minimizes human error, enhances repeatability, and optimizes the overall efficiency of screw jack systems.
  • Design Optimization: Advancements in computer-aided design (CAD) and simulation tools have allowed for the optimization of screw jack designs. Finite element analysis (FEA) and virtual prototyping enable the evaluation and refinement of various design parameters, resulting in improved load-bearing capabilities, reduced weight, and enhanced structural integrity. These design optimizations contribute to increased efficiency and reliability.

These advancements in screw jack technology have collectively improved efficiency, reliability, and overall performance. Manufacturers continue to innovate and refine screw jack designs to meet the evolving needs of various industries, ensuring that screw jacks remain a reliable and efficient solution for lifting and adjusting loads.

screw jack

What are the common signs of wear or issues that might require screw jack maintenance?

Regular maintenance is important for ensuring the proper functioning and longevity of screw jacks. It helps identify and address potential issues before they escalate into more significant problems. Here are some common signs of wear or issues that might indicate the need for screw jack maintenance:

  • Unusual Noise: If a screw jack starts producing unusual noises during operation, such as grinding, squeaking, or knocking sounds, it could indicate a problem. These noises may be a result of worn or damaged components, inadequate lubrication, misalignment, or other mechanical issues. Prompt maintenance is necessary to diagnose and resolve the source of the noise.
  • Increased Friction: If the movement of the screw jack becomes more difficult or requires excessive force, it could indicate increased friction within the mechanism. This may be caused by insufficient lubrication, contaminated lubricant, or worn components. Addressing the friction issue through maintenance, including lubrication and inspection of components, is important to prevent further damage and ensure smooth operation.
  • Excessive Play or Backlash: Excessive play or backlash refers to unwanted movement or looseness in the screw jack assembly. It can occur due to worn or damaged components, improper assembly, or misalignment. Excessive play can negatively impact the precision, stability, and load-bearing capacity of the screw jack. Maintenance should be conducted to identify the cause of the play and rectify it to restore proper functionality.
  • Irregular Movement: If the screw jack exhibits irregular or jerky movement instead of smooth and consistent operation, it may indicate issues with the drive mechanism, misalignment, or worn parts. Irregular movement can affect the performance and accuracy of the screw jack, potentially leading to safety hazards or reduced efficiency. Maintenance is necessary to diagnose and address the underlying causes of irregular movement.
  • Leakage or Seal Damage: Screw jacks equipped with hydraulic or lubricant-filled systems may experience leakage or seal damage over time. Leakage can result in a loss of lubrication or hydraulic fluid, leading to inadequate lubrication, reduced performance, or system failure. Regular inspection and maintenance of seals, gaskets, and fluid levels are necessary to identify and rectify any leaks or seal damage.
  • Visible Wear or Damage: Physical inspection of the screw jack is essential to identify visible signs of wear or damage. This may include worn threads, cracked or damaged housing, bent or misaligned components, or signs of corrosion. Any visible wear or damage should be addressed through maintenance to prevent further deterioration and ensure safe and reliable operation.

Regular inspection and maintenance are crucial to detect and address these signs of wear or issues promptly. It is recommended to follow the manufacturer’s guidelines for maintenance intervals and procedures to ensure the optimal performance and longevity of screw jacks.

screw jack

How do manufacturers ensure the quality and reliability of screw jack mechanisms?

Manufacturers employ various quality control and testing measures to ensure the quality and reliability of screw jack mechanisms. These measures are implemented throughout the manufacturing process to verify that the screw jack meets the required standards and performance specifications. Here are some common practices manufacturers use to ensure quality and reliability:

  • Design and Engineering: Manufacturers invest in robust design and engineering processes to develop screw jack mechanisms that meet the intended specifications. This includes selecting appropriate materials, determining the optimal thread design, and performing structural analysis to ensure the screw jack can handle the expected loads and movements. Thorough design and engineering processes contribute to the overall quality and reliability of the mechanism.
  • Material Selection: Manufacturers carefully select materials with the necessary strength, durability, and corrosion resistance for the construction of screw jack mechanisms. High-quality materials, such as alloy steels or stainless steels, are often chosen to ensure the longevity and reliability of the screw jack. Material selection is based on factors such as load requirements, environmental conditions, and industry standards.
  • Quality Assurance: Manufacturers implement comprehensive quality assurance processes to monitor and control the manufacturing steps. These processes include inspections, audits, and documentation to ensure that each screw jack meets the specified quality standards. Quality assurance measures may involve checks for dimensional accuracy, thread quality, surface finish, and proper assembly. Through quality assurance, manufacturers can identify and address any potential defects or deviations from the desired specifications.
  • Testing and Performance Evaluation: Manufacturers conduct rigorous testing and performance evaluations to verify the functionality, load capacity, and reliability of screw jack mechanisms. This may involve load testing, endurance testing, and cycling tests to simulate real-world operating conditions. Testing helps validate the performance of the screw jack and ensures that it can handle the intended loads and movements without failure or significant degradation over time.
  • Compliance with Standards: Manufacturers ensure that screw jack mechanisms comply with relevant industry standards and regulations. Compliance with standards such as ISO (International Organization for Standardization) or specific industry standards provides assurance of the quality and reliability of the product. Manufacturers may obtain certifications or undergo third-party audits to validate compliance with these standards.
  • Customer Feedback and Continuous Improvement: Manufacturers value customer feedback and use it to drive continuous improvement in the design, manufacturing, and performance of screw jack mechanisms. By actively seeking input from customers and end-users, manufacturers can identify areas for enhancement and implement changes to improve the quality and reliability of their products.

By implementing stringent design processes, careful material selection, thorough quality assurance, testing and performance evaluation, compliance with standards, and continuous improvement practices, manufacturers ensure the quality and reliability of screw jack mechanisms. These measures help deliver screw jacks that meet the industry’s expectations for performance, safety, and durability.

China OEM Simostep Stepper Motor 4 Nm Shaft Diameter 12mm   arrow shaft screwChina OEM Simostep Stepper Motor 4 Nm Shaft Diameter 12mm   arrow shaft screw
editor by CX 2024-02-07

Leave a Reply

Your email address will not be published. Required fields are marked *