China best CZPT Transmission Hw19710 Auto Parts Gearbox Intermediate Shaft Az2210030215 screw conveyor shaft seals

Product Description

Main Gearbox Parts:Transmission Front Housing & Control System, Transimission Housing -Middle, Lay Shaft, Main Shaft, Idle Wheel, Sub Gearbox 1, Sub Gearbox 2, Import Shaft and Cover, Small Cover, Fork Shaft(HW19710), (HW19710)/Pump and Pipe(HW19710), Air Pipeand.

 

PART(S) NUMBER

Part Name

AZ

Main Shaft Ass.

AZ

Lay Shaft-left

AZ

Lay Shaft-right

AZ

Small Cover Ass.

WG

Synchronizer Ring

WG

Double H Valve

WG220325571

Pneumatic Control Valve

WG

Pressure Switch

Q2881016F9

Set Screw

WG

Clutch Release Fork

AZ

Transmission Front Housing

AZ225711005

Transmission Middle Housing

AZ

Lay Shaft Forth Gear

WG

Idler Shaft

AZ225710040

Range Gear Subbox Ass.

WG

Planetary Rack

AZ

Output Shaft

WG

Fork Pendulum Block

WG

Range Block Cylinder

WG225710009

Odometer Connector Ass.

AZ

Transmission Back Housing

WG

Synchronous Push Block

WG

Planetary Wheel

WG

Input Shaft End Cap

WG

Support Rod Ass.

WG

Sensor Drive Ring

AZ

Shift Head

WG

Gear Selection Support Shaft

WG

Oil Pump Ass.

Female Screw

 

 

Sincere to customer and in good faith of quality is our forever followed motto. It’s the basement to be a human and on business. We take all responsibility for our products and service sincerely.

 

 

 

 

Company brief introduction:
We are established in 2571. The company is located in HangZhou City, ZheJiang Province, where CZPT is located.Sincere to the customer and in good faith of quality is Deruna Heavy Truck Parts forever followed motto. It’s the basement to be a human and do business. We take all responsibility for our products and service sincerely.

Main product:

Our company specializing in the manufacturing and wholesale of China National Heavy Duty Truck, ZheJiang Heavy Duty Truck, Beiben truck, CZPT truck and its related accessories. We mainly engage in various accessories products such as truck parts, cylinder blocks, crankshafts, diesel engines.
1.Power parts, including engines and peripheral parts [such as starters, generators, superchargers, various filter elements, etc.
2. Driving Part [also called transmission part], including clutch, gearbox, transmission shaft, axle, etc.;
3. Suspension part, including front and rear steel plates and fasteners, balance shaft, thrust rod, etc.
4. Steering part, including steering gear and Horizontal pull rods, etc.
5. Electrical appliances and valve parts, including various types of electrical switches, wiring harnesses, bulbs, and various braking components (valves).
6. Control and cargo parts, namely cab and cargo compartment.
7. Frame [that is, the beam] and so on.

Overseas market at present:

Our sales have averaged over 10 years of experience in exporting, and are proficient in all processes of business operation which can efficiently fulfill customer needs.

We currently export to 37 countries, and the client partners from Russia, New Zealand, Fiji, Papua New Guinea, Malaysia, Zambia, South Sudan, United Arab Emirates, Zimbabwe, Colombia and so on. We can also help you to supply registration documents of the importing in different countries. Welcome new and regular customers to contact us to establish future business relationships and achieve common success!

Q: What if I can not provide part number for reference?A: If no part number, we can judge and quote the requested parts by engine name-plate or photos; It would be great if you could provide us with the chassis number(VIN) so that we can provide a more comprehensive analysis and accurate quote feedback based on your truck model.

Q: Can we buy 1 pcs of truck parts for quality testing?A: Yes, we are glad to send 1pcs item for quality testing if we have the truck parts of you need in stock.

Q: Do you test all your goods before delivery?A: Yes, we have 100% test before delivery.

Q: How do you make our business long-term and good relationship?A: We keep good quality and competitive price to ensure our customers benefit; We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.

Q: How long is the production time of the goods?A: We have sufficient stock of regular specifications for immediate delivery; Non-conventional specifications generally require stocking for about 7-10 days; Large quantities order need to be in stock for about 15-20 days.

Q: What is the packing?A: Neutral packing of paper carton or wooden case. Or we customize the packaging according to your requirements

/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Car, Truck
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Optional
Step: Optional
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|
Request Sample

Customization:
Available

|

Customized Request

screw jack

Can screw jacks be adapted for use in both indoor and outdoor environments?

Yes, screw jacks can be adapted for use in both indoor and outdoor environments. They are versatile mechanical devices that can be designed and manufactured to withstand various environmental conditions. Here’s how screw jacks can be adapted for both indoor and outdoor use:

  • Enclosure and Sealing: When screw jacks are intended for outdoor use, they can be equipped with enclosures and sealing mechanisms to protect the internal components from environmental factors such as moisture, dust, or debris. These enclosures are typically made from durable materials like stainless steel or corrosion-resistant coatings to ensure long-term protection.
  • Corrosion Resistance: Outdoor environments often expose equipment to corrosive elements. To address this, screw jacks can be manufactured with corrosion-resistant materials or coatings. Stainless steel or zinc plating are commonly used to enhance the corrosion resistance of screw jacks, making them suitable for outdoor applications where exposure to moisture, humidity, or chemicals is expected.
  • Weatherproofing: Screw jacks can be designed with weatherproofing features to resist environmental conditions such as rain, snow, or extreme temperatures. This may include seals, gaskets, or protective covers that prevent water or debris from entering the internal components, ensuring reliable operation in outdoor environments.
  • UV Resistance: Outdoor applications often expose equipment to ultraviolet (UV) radiation from sunlight. Screw jacks can be manufactured using materials that are UV-resistant or incorporate UV-protective coatings. This helps prevent degradation or discoloration of the components due to prolonged exposure to sunlight.
  • Temperature Considerations: Screw jacks can be designed to operate within a wide temperature range to accommodate diverse outdoor environments. Specialized lubricants and materials with high-temperature stability can be used to ensure proper functioning and prevent damage or degradation in extreme temperature conditions.
  • IP Ratings: In certain applications, screw jacks may require specific Ingress Protection (IP) ratings to ensure their suitability for outdoor use. IP ratings indicate the level of protection against solids and liquids. Screw jacks can be manufactured with specific IP ratings to meet the environmental requirements of different outdoor applications.

By incorporating these adaptations, screw jacks can be effectively used in both indoor and outdoor environments. Whether it’s in manufacturing facilities, construction sites, or outdoor maintenance tasks, screw jacks provide reliable performance and can withstand the challenges posed by various environmental conditions.

screw jack

How do screw jacks ensure smooth and controlled linear movement of loads?

Screw jacks are designed to ensure smooth and controlled linear movement of loads. They employ several mechanisms and features that contribute to this capability. Here are some ways in which screw jacks achieve smooth and controlled linear movement:

  • Threaded Screw and Nut Mechanism: Screw jacks consist of a threaded screw and a matching nut. The screw is rotated using a handle or a motor, causing it to move linearly through the nut. The thread geometry allows for smooth and controlled movement as the screw advances or retracts. The precision of the screw thread ensures that the load moves linearly without jerks or sudden changes in speed.
  • Low Friction and High Efficiency: Screw jacks are designed to minimize friction and maximize efficiency. The components of the screw jack, such as the screw, nut, and bearing surfaces, are manufactured with smooth and precise finishes. This reduces frictional forces and minimizes energy losses during operation. The low friction characteristics enable smooth movement and ensure that a significant portion of the input force is translated into lifting or lowering the load.
  • Load Distribution and Stability: Screw jacks are designed to distribute the load evenly across the screw thread and nut. This ensures that the load is supported and guided in a stable manner during linear movement. The load-bearing components of the screw jack, such as the housing and base, are constructed to provide adequate strength and rigidity, minimizing deflection and maintaining stability throughout the lifting or lowering process.
  • Anti-Backlash Mechanisms: Backlash refers to the slight axial movement or play that can occur between the screw and the nut in a screw jack. To minimize backlash and ensure precise control, screw jacks often incorporate anti-backlash mechanisms. These mechanisms, such as preloading springs or adjustable backlash nuts, reduce or eliminate any free movement, allowing for more accurate and controlled linear motion of the load.
  • Overload Protection: Screw jacks may include overload protection features to prevent damage or failure in the event of excessive loads or unexpected conditions. These features can include mechanical stops, shear pins, or overload clutches that disengage or limit the load-carrying capacity of the screw jack when predetermined limits are exceeded. Overload protection mechanisms contribute to the safe and controlled movement of loads.

By employing a threaded screw and nut mechanism, minimizing friction, ensuring load distribution and stability, incorporating anti-backlash mechanisms, and providing overload protection, screw jacks enable smooth and controlled linear movement of loads. These features make screw jacks suitable for a wide range of applications where precise positioning, lifting, or lowering with controlled speed and stability is required.

screw jack

How do screw jacks handle variations in load, speed, and precision?

Screw jacks are designed to handle variations in load, speed, and precision through several mechanisms and features. Here’s how screw jacks handle these variations:

  • Load Variations: Screw jacks are capable of handling different load variations. The load capacity of a screw jack depends on factors such as the mechanical strength of the components, the thread design, and the material properties. By selecting the appropriate screw jack with the required load capacity and considering factors such as the load distribution, safety factors, and duty cycle, variations in load can be accommodated within the specified limits.
  • Speed Variations: Screw jacks can operate at different speeds based on the application requirements. The speed of a screw jack is influenced by factors such as the pitch of the screw, the rotational speed of the input device, and the mechanical advantage of the system. By adjusting the rotational speed of the input device or selecting screw jacks with different pitch options, variations in speed can be achieved. It is important to note that higher speeds may affect the efficiency, accuracy, and load capacity of the screw jack system.
  • Precision: Screw jacks offer precise positioning capabilities. The linear displacement achieved per revolution of the screw can be accurately controlled. This precision is achieved through the pitch of the screw, which determines the linear displacement per rotation. By selecting screw jacks with suitable pitch options and incorporating additional components such as limit switches or position sensors, precise positioning can be achieved with minimal backlash or play. It is important to consider the required level of precision and the specific application’s tolerance requirements when choosing the appropriate screw jack.
  • Adjustability: Screw jacks provide adjustability to accommodate variations in load, speed, and precision. The system can be fine-tuned by adjusting the input device’s rotational speed, changing the pitch of the screw, or incorporating gearing mechanisms for increased mechanical advantage. This adjustability allows for optimization based on the specific operational requirements, ensuring that the screw jack system performs effectively within the desired parameters.
  • Control and Feedback: Screw jacks can be equipped with control systems and feedback mechanisms to enhance load, speed, and precision management. These systems can include motor controllers, position sensors, limit switches, or even automation interfaces. By integrating such control and feedback mechanisms, the screw jack system can be monitored, adjusted, and actively controlled to handle variations in load, speed, and precision more effectively.

In summary, screw jacks handle variations in load, speed, and precision through their design features, adjustability, and the incorporation of control systems. By selecting the appropriate screw jack and considering factors such as load capacity, speed requirements, precision needs, and control mechanisms, variations in load, speed, and precision can be accommodated to meet the specific operational demands of the application.

China best CZPT Transmission Hw19710 Auto Parts Gearbox Intermediate Shaft Az2210030215   screw conveyor shaft sealsChina best CZPT Transmission Hw19710 Auto Parts Gearbox Intermediate Shaft Az2210030215   screw conveyor shaft seals
editor by CX 2024-03-21

Leave a Reply

Your email address will not be published. Required fields are marked *