Tag Archives: screw top

China Custom Top Quality Good Resistance High Temperature Inconel 718 Bar Hasteloy C276 Rod Shaft Price Per Kg screw adjustable axle stands

Product Description

Special-Shaped Titanium Ti Evaporation Crucible Factory

Product Description

Here are some products that can be made using MIM (Metal Injection Molding) process:

1. Medical implants and devices, such as bone screws, dental implants, and surgical instruments.
2. Firearms components, including triggers, hammers, and other small parts.
3. Aerospace and defense parts, such as gears, brackets, and housings.
4. Electronics components, including connectors, switches, and small gears.
5. Automotive components, including engine components, brake system components, and suspension parts.
6. Jewelry components, including clasps, bezels, and decorative elements.
7. Consumer goods parts, such as eyeglass frames, watch components, and small gadgets.
8. Industrial tool parts, including inserts, blades, and cutting tools.
9. Musical instrument components, such as guitar parts and trumpet valves.
10. Sporting equipment components, including golf club heads, fishing reel parts, and bike components.

These are just a few examples of the many products that can be made using the MIM process. With its ability to produce complex geometries and high-quality finishes, MIM is an ideal manufacturing process for a wide range of industries and applications.

MIM Parts Tolerance
The tolerances for MIM (Metal Injection Molding) parts are typically very close and precise. In general, tolerances for MIM parts can be as tight as +/- 0.5% of the dimension, or +/- 0.005 inches (0.127 mm), whichever is greater. However, the specific tolerance requirements will depend on the application and the design of the part.
The MIM process is capable of producing complex shapes with high accuracy and repeatability, making it possible to achieve very tight tolerances. Additionally, the material properties of MIM parts are highly consistent, which further contributes to the precision and consistency of the final product.
It’s important to note that achieving tight tolerances may require additional steps, such as post-processing or secondary operations, to ensure that the parts meet the required specifications. Additionally, the cost of producing parts with tight tolerances can be higher due to the additional time and effort required to achieve them.

MIM Parts Advantage

1. Complex geometries: MIM can produce complex shapes and geometries that are difficult or even impossible to achieve with traditional manufacturing methods. This enables designers to create parts with intricate features and high functionality.
2. High precision: The MIM process can achieve very tight tolerances, making it possible to produce parts with high accuracy and consistency.
3. Excellent surface finish: MIM parts have a high-quality surface finish, which eliminates the need for additional finishing operations.
4. Versatility: MIM can produce parts from a range of materials, including stainless steel, low alloy steels, tool steels, titanium alloys, and more. This makes it possible to create parts with a wide range of mechanical properties and applications.
5. Cost-effective: MIM is a cost-effective manufacturing process, especially for small to medium-scale production runs. It can eliminate the need for multiple manufacturing steps and reduce material waste, resulting in lower overall costs.
Overall, MIM parts offer a range of benefits for manufacturers and customers alike, including the ability to create complex geometries, high precision, excellent surface finishes, versatility, and cost-effectiveness.

 

Detailed Photos

 

The MIM Process

the MIM (Metal Injection Molding) process can be broken down into several steps:

1. Formulation: The first step in the MIM process is to formulate the feedstock. This typically involves mixing a fine metal powder with a thermoplastic binder material and sometimes a lubricant. The binder material helps to hold the metal particles together and enables them to flow like plastic.

2. Injection molding: The feedstock is then injected into a mold cavity using an injection molding machine. The mold is typically made from steel or other durable materials and is designed to produce the desired shape of the final part.

3. Debinding: Once the part has been molded, it is subjected to a debinding process, which removes the binder material from the metal particles. This is typically done by heating the part in a CZPT or using a solvent.

4. Sintering: After debinding, the part is subjected to a high-temperature sintering process. This process fuses the metal particles together, forming a CHINAMFG metal part with the desired mechanical properties. The sintering process can take several hours to complete, depending on the size and complexity of the part.

5. Finishing: After sintering, the final part may undergo additional finishing operations, such as polishing, machining, or plating, to achieve the desired surface finish and tolerances.

Overall, the MIM process is a highly versatile and precise manufacturing method that is capable of producing complex metal parts with high accuracy and consistency. It is often used in industries such as medical devices, firearms, aerospace, electronics, and automotive, where precision, complexity, and cost-effectiveness are key considerations.

 

Product Parameters

The Material of the MIM Product

Material System Material Composition Typical Applications
Low Alloy Steel Fe-2Ni , Fe-8Ni Automobile, machinery, and other industries, particularly in structural parts
Stainless Steel 316L,17-4PH,420,440C Medical equipment, clocks, watches
Carbide WC-Co Various tools, clocks, watches
Ceramic Al2O3 ,ZrO2 ,SiO2 IT electronics, daily necessities, watches
Heavy Alloys W-Ni-Fe,W-Ni-Cu,W-Cu The arms industry, communications, daily necessities
Titanium Ti,Ti-6Al-4V Medical and Firearm structural parts
Magnetic Materials Fe, NdFeB,SmCo5, Fe-Si Magnetic properties of the various components
Tool Steel CrMo4,M2 Tools

Typical properties of several MIM materials

Materials Density Hardness Tensile Strength Elongation
g/cm³ Rockwell Mpa %
Fe-based alloys MIM-2200(Sintered) 7.65 45HRB 290 40
MIM-2700(Sintered) 7.65 69HRB 440 26
MIM-4605(Sintered) 7.62 62HRB 415 15
MIM-4605(Quenching and tempering) 7.62 48HRC 1655 2
Stainless steel MIM-316L(Sintered) 7.92 67HB 520 50
MIM-17-4PH(Sintered) 7.5 27HRC 900 6
MIM-17-4PH(Sintered) 7.5 40HRC 1185 6
MIM-430L(Sintered) 7.5 65HRB 415 25
Tungsten alloys 95%W-Ni-Fe 18.1 30 960 25
97%W-Ni-Fe 18.5 33 940 15
Carbide YG8X 14.9 HRA90 Bending Strength 2300  
Fine Ceramics Al2O3 3.98 HRA92 Bending Strength 2300  

Packaging & Shipping

 

  1. We prefer DHL or TNT express or other air freight between 1kg-100kg.
  2. we choose sea freight of more than 100kg or more than 1CBM
  3. As per customized specifications.

 

Company Profile

About us

HangZhou CHINAMFG Technology Co., Ltd has been an established manufacturer since 2008. It is located in HangZhou City, ZheJiang Province, which is close to ZheJiang . The CHINAMFG Technology is fully equipped with all kinds of metal injection molding equipment and Powder Metallurgy equipment.
We specialize in tooling design and product development. We can work with materials such as low alloy steel, stainless steel, tool steel, and titanium steel. We serve a diverse range of applications in diverse industries – Automotive, Industrial, Electronics, and Medical. As 1 of the leading suppliers of metal parts in China, we offer high-quality, custom, precision parts at competitive prices according to customer drawings and specifications.

Our advantage in the industrial market is that we can provide competitive prices for our customers. We have a completely competitive metal parts provider and supply chain solution. With a strong focus on continual improvement, we only utilize best practices to ensure that the work we do for our customers is done in the most efficient, precise, and cost-effective way possible.
The focus of Machining Design Associated has been and always will be on developing and maintaining lasting relationships with customers. We are proud to be large enough to handle our customer needs yet small enough to offer the personal attention customers appreciate.

We have full OEM Experience worldwide, providing them with One-stop solutions for a broad range of applications. We believe in quality and on-time delivery is our corn idea in order to meet our customers’ requirements.

We look CHINAMFG to cooperating with you!

 

Our Advantages

Why Choice Emitech as your MIM parts supplier, there may be several reasons why they could be a good choice:
1. Experience: CHINAMFG may have significant experience in the MIM industry, with a proven track record of producing high-quality parts for various applications.
2. Precision: CHINAMFG may use advanced technology and equipment to manufacture MIM parts with tight tolerances and high precision, ensuring consistent quality.
3. Customization: CHINAMFG may work closely with its customers to develop customized MIM parts that meet specific requirements and specifications.
4. Material Variety: CHINAMFG may offer a wide range of material options for MIM, including stainless steel, low alloy steels, tool steels, titanium alloys, and more, enabling their customers to choose the best material for their applications.
5. Cost-effectiveness: CHINAMFG may offer competitive pricing for their MIM parts, making it a cost-effective option for small to medium-scale production runs.
If CHINAMFG meets your specific needs and requirements, they may be a good choice for your MIM parts supplier, based on factors such as experience, precision, customization, material variety, and cost-effectiveness.

After Sales Service

Factory Supply High Demand aluminum machining parts factory
We usually provide 12 Months of repair service. If our duty, we will respond to send the new parts.

Our Service

 

Our Processing CNC center, CNC milling, CNC turning, drilling, grinding, bending, stamping, tapping,
Surface finish Polishing, sandblasting, Zinc-plated, nickel-plated, chrome-plated, silver-plated, gold-plated, imitation gold-plated,
Tolerance 0.05mm~0.1mm
QC System 100% inspection before shipment
Drawing format CAD / PDF/ DWG/ IGS/ STEP
Packaging Plastic bag/Standard package / Carton or Pallet / As per customized specifications
Payment Terms 30 -50%T/T in advance, 70-50% balance before delivery; Pay Pal or Western Union is acceptable.
Trade terms EXW, FOB, and CIF, As per the customer’s request
Shipment Terms

1)We prefer DHL, TNT express, or other air freight between 1kg-100kg.

2) we prefer sea freight of more than 100kg or more than 1CBM
3) As per customized specifications.

Note The CNC machining parts are usually custom-made based on the customer’s drawings and samples. So we need the Down Payment

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

After-sales Service: Repaire
Warranty: Half a Year
Condition: New
Customization:
Available

|

Customized Request

.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}

Shipping Cost:

Estimated freight per unit.







about shipping cost and estimated delivery time.
Payment Method:







 

Initial Payment



Full Payment
Currency: US$
Return&refunds: You can apply for a refund up to 30 days after receipt of the products.

screw jack

What role do screw jacks play in the precision of assembly line operations?

Screw jacks play a crucial role in ensuring the precision of assembly line operations. They are widely used in manufacturing and assembly processes where accurate positioning, alignment, and control are essential. Here’s how screw jacks contribute to the precision of assembly line operations:

  • Precise Positioning: Screw jacks provide precise and controlled linear motion, allowing for accurate positioning of components, parts, or tools on the assembly line. The screw mechanism of the screw jack enables fine adjustments with high positional accuracy, ensuring that each component is correctly placed and aligned according to the required specifications.
  • Height Adjustment: Screw jacks are commonly used for height adjustment applications in assembly lines. They allow for easy and precise vertical movement, enabling operators to align workstations, fixtures, or equipment at the optimal height for efficient assembly operations. The ability to fine-tune the height with screw jacks ensures ergonomic working conditions and promotes worker comfort and productivity.
  • Load Handling: Screw jacks have the capability to handle a wide range of loads, from light to heavy. This makes them suitable for assembly line operations that involve different types of components or equipment with varying weights. By providing reliable load support and stability, screw jacks contribute to the precision of assembly line operations by ensuring that the load is properly supported and aligned during the assembly process.
  • Force Control: Screw jacks offer precise force control capabilities, allowing operators to apply consistent and controlled forces during assembly operations. This is particularly important for tasks that require delicate handling or specific force requirements, such as tightening bolts, fastening components, or applying pressure for proper fitment. The force control provided by screw jacks helps maintain the required precision and avoids overloading or damaging the assembly components.
  • Synchronization: In assembly line operations that involve multiple workstations or moving parts, screw jacks can be synchronized to ensure coordinated movement. By mechanically or electrically linking the screw jacks together, they canscrew jack

    What safety precautions should be followed when operating screw jacks?

    Operating screw jacks safely is essential to prevent accidents, injuries, and damage to equipment. Here are some important safety precautions that should be followed when operating screw jacks:

    • Read and Understand the Manual: Before operating a screw jack, carefully read and understand the manufacturer’s instruction manual. The manual provides important safety information, operating procedures, and maintenance guidelines specific to the screw jack model. Following the manufacturer’s instructions is crucial for safe and proper operation.
    • Inspect the Screw Jack: Prior to use, inspect the screw jack for any signs of damage, wear, or loose components. Check for proper lubrication and ensure that all connections and fasteners are secure. If any issues are identified, do not operate the screw jack and address the problems through maintenance or contact the manufacturer for assistance.
    • Use Appropriate Personal Protective Equipment (PPE): When operating a screw jack, wear the necessary personal protective equipment (PPE) as recommended by the manufacturer and applicable safety regulations. This may include safety glasses, gloves, steel-toed shoes, or other protective gear depending on the specific application and work environment.
    • Ensure Stable Support: Place the screw jack on a stable and level surface capable of supporting the load. Ensure that the supporting structure or surface is capable of withstanding the forces generated during the lifting or lowering operation. Use appropriate blocking or shoring if additional support is required.
    • Do Not Exceed Load Capacity: Never exceed the load capacity specified by the manufacturer for the screw jack. Overloading the screw jack can lead to instability, component failure, or other safety hazards. It is important to know the weight of the load being lifted or supported and select a screw jack with an appropriate load rating.
    • Operate Smoothly and Carefully: Operate the screw jack smoothly and carefully, avoiding sudden or jerky movements. Use the operating handle or control mechanism provided by the manufacturer and follow the recommended operating procedures. Maintain control over the lifting or lowering process, and ensure that personnel or body parts are clear of pinch points or potential hazards.
    • Do Not Use as a Permanent Support: Screw jacks are not designed to be used as permanent supports or to sustain constant loads over extended periods. They are intended for intermittent or temporary use. Avoid using screw jacks as permanent supports or in situations where prolonged load-bearing is required.
    • Properly Store and Maintain: After use, properly store the screw jack in a clean and dry environment. Follow the manufacturer’s maintenance guidelines for lubrication, inspection, and periodic maintenance. Regularly check the screw jack for any signs of wear, damage, or deterioration, and address any issues promptly.
    • Training and Competence: Ensure that operators are adequately trained and competent in the safe operation of screw jacks. Training should cover proper use, maintenance, and understanding of the associated hazards and safety precautions.

    Following these safety precautions when operating screw jacks promotes a safe working environment and helps prevent accidents or injuries. It is important to prioritize safety and adhere to the manufacturer’s guidelines and industry best practices.

    screw jack

    How do screw jacks ensure stable and controlled movement of loads?

    Screw jacks are designed to ensure stable and controlled movement of loads through various mechanisms and features. These mechanisms work together to provide stability, precision, and safety during load handling. Here’s how screw jacks achieve stable and controlled movement:

    • Self-Locking Mechanism: Screw jacks are equipped with self-locking mechanisms that prevent the load from lowering or descending when the screw is not being rotated. This mechanism ensures that the load remains stable and stationary even in the absence of an external driving force. The self-locking feature is achieved through the thread design and the friction between the screw and the nut. It provides inherent stability and eliminates the need for additional braking or locking mechanisms.
    • High Mechanical Advantage: Screw jacks offer a high mechanical advantage, allowing for controlled movement of heavy loads with relatively low input force. The mechanical advantage is determined by the pitch of the screw and the size of the input device. By increasing the pitch or using a larger input device, the mechanical advantage can be enhanced, enabling precise and controlled movement even with substantial loads.
    • Precision Thread Design: The threads of the screw and the nut in screw jacks are precision-designed to minimize backlash and play, ensuring smooth and accurate movement. The thread design influences the amount of axial movement achieved per rotation of the screw, directly impacting the precision of load positioning. By using high-quality threads and incorporating anti-backlash features, screw jacks maintain stability and control during load movement.
    • Limit Switches and Position Sensors: Screw jacks can be equipped with limit switches or position sensors to provide accurate position feedback and prevent overtravel or exceedance of specified limits. These devices ensure that the load stops at the desired position and prevent any unsafe or unintended movement. Limit switches and position sensors enhance the control and safety of screw jack systems.
    • Additional Safety Features: Screw jacks may incorporate additional safety features to ensure stable and controlled movement. These features can include overload protection mechanisms that prevent excessive loads from damaging the screw jack or the load-bearing structure. Emergency stop options or mechanical brakes may also be included to halt the movement in case of emergencies or power failure.
    • Sturdy Construction: Screw jacks are built with robust materials and construction to withstand heavy loads and provide stability during operation. The components are designed to handle the forces exerted during load movement and maintain structural integrity. Sturdy construction ensures that the screw jack can reliably handle the load without compromising stability or control.

    By incorporating self-locking mechanisms, high mechanical advantage, precision thread design, limit switches, position sensors, additional safety features, and sturdy construction, screw jacks ensure stable and controlled movement of loads. These features work together to provide precise positioning, prevent unintended movement, and enhance the safety of load handling operations.

    China Custom Top Quality Good Resistance High Temperature Inconel 718 Bar Hasteloy C276 Rod Shaft Price Per Kg   screw adjustable axle standsChina Custom Top Quality Good Resistance High Temperature Inconel 718 Bar Hasteloy C276 Rod Shaft Price Per Kg   screw adjustable axle stands
    editor by CX 2024-03-07

in Tanta Egypt sales price shop near me near me shop factory supplier Top Valued Screw Air Compressor with Factory Price manufacturer best Cost Custom Cheap wholesaler

  in Tanta Egypt  sales   price   shop   near me   near me shop   factory   supplier Top Valued Screw Air Compressor with Factory Price manufacturer   best   Cost   Custom   Cheap   wholesaler

The new goods consist of a series of substantial-tech and substantial high quality chains and sprockets and gears, this kind of as chains and gearboxes for agricultural machineries, metallurgical chains, escalator phase-chains, substantial-velocity tooth chains, timing chains, self-lubrication chains, amid which have sort large velocity tooth chain for car department dynamic box and aerial chains fill in the blanks of chain in China. There is a specialized centre of province stage, EPG academician operating station, experiment station for EPG put up doctors, and countrywide 863 system set up in EPG team. With these platforms and robust technical potential, the far more than four hundred specialists have developed all assortment of particular high specific and high energy goods, performed mould programs for essential parts in the automobile and nationwide business revitalizing program, resulting a lot more than 5000 designed in excess of, between which 33 products are autonomous patent technology with 4 patent approved . Our products are created by modern day computerized equipment and gear.

Best Valued Screw Air EPTT With Manufacturing facility Cost

Solution Description

The electric screw air compressor is equiped with one 11kw electric powered motor with totally free air delivery of one.three-one.8m3/min at the stress of seven-twelve bar. It is applicated for industy of EPTTry , EPTT , Electrical EPTT, Cement, EPT, EPTT EPT…

This variety of compressor is equiped with title brand name airend(screw) ,centrifugal cooling enthusiast and touch EPT controller, with immediate EPT, dust proof, seem proof design.

VSD kind is also available for this design , it can conserve vitality of thirty-35% , it can conserve far more EPT for enprise operator.

EPTnical Specifications
Airend Working force Bar 7-twelve
Free air supply m3/min 1.three-1.8
Compression phase 1
Electric powered motor EPTT KW 11
Working voltage V/HZ 380/fifty or EPTT
Insulation F
Protection quality IP54
Energy Grade IE2
Starter Immediate
EPTT compressor Pushed Immediate
Separator ability L 16
Lubrication ability L 8
Cooling technique Air or Drinking water
Outlet G3/4
Dimension mm 1050*690*1080
Excess weight kg 460

Solution Specifics

one. Air conclude of screw air compressor

The air finish is with condition-of-the artwork screw factor and four -six SKF bearings to make certain it plenty of air output and EPTTer lifetime.

2.Electric powered EPT of the air compressor

Name manufacturer experienced IP54 ,F insulation, IE2 , IE3 motor , high performance and energy preserving.

3. Intake valve of the screw air compressor

EPT performance consumption valve guards the compressor components by removing ninety nine% soiled particles down to three microns.

four. Oil Air separator

EPT effectiveness separating for oil and air and minimal oil content in the compressed air.

5. Contact Display screen EPTTler.

6. EPT successful Centrifugal fan can give greatest cooling for screw compressor.

7.Dust evidence mesh to protect EPT manage system

Ceritifications

Solution Employs

Following-EPT Service

WINDBELL claims to provide specialized assistance for all screw Air EPTT made. Providing guid for set up,procedure and maintenance.

For periodically routine maintenance of silent air compressor , we advise to use our unique spare elements in orEPTTto our authentic technical specs. You should contact us freely, if you have any desire for oil filter, air filter factor, oil air separator element for jack hammer air compressor .

EPTT Information

WindEPT EPTT Ltd. was estabEPTTd in 2006. It is a large-tech company largely producing Screw Air EPTT.

Located in HangEPT National EPT and EPTT EPTT EPTT DeveXiHu (West EPT) Dis.Hu (West EPT) Dis.ment Zone, EPT has a lot more than one hundred personnel equipped with fifty EPTd screening EPTTs operating in the EPTT area of 20000 sq. meter. A substantial profile R ampD staff with expertise in deveXiHu (West EPT) Dis.Hu (West EPT) Dis.ing items with GHH and Rotor, has a lot more than twenty patents granted. The business can produce much more than 4000 Air EPTT each and every year.

We feel that without having an EPTd high quality management system you are not able to make substantial quality goods. With ISO9001 and ISO14001 certifications, EPT aims to be a pioneer in supplying customers productive, power-saving, and environment-welcoming solutions in the software of air compressor. Based mostly on its R ampD output, EPT has productively applied its options to the field of mining, tunneling, outdoor design and its EPT also faXiHu (West EPT) Dis.Hu (West EPT) Dis.tates the creation of health care oxygen turbines and textile tools. The Screw Air EPTT are broadly sold to SouthEPT Asia, EPT Asia, Middle EPT, Africa, and South The us…

  in Tanta Egypt  sales   price   shop   near me   near me shop   factory   supplier Top Valued Screw Air Compressor with Factory Price manufacturer   best   Cost   Custom   Cheap   wholesaler

  in Tanta Egypt  sales   price   shop   near me   near me shop   factory   supplier Top Valued Screw Air Compressor with Factory Price manufacturer   best   Cost   Custom   Cheap   wholesaler

Motorcycle made in China – replacement parts – in Enugu Nigeria Sprocket Seat Lock Plate & Screw Motorcycle Parts for Jialing Jl110-Oumurs with ce certificate top quality low price

Motorcycle  made in China - replacement parts -  in Enugu Nigeria  Sprocket Seat Lock Plate & Screw Motorcycle Parts for Jialing Jl110-Oumurs with ce certificate top quality low price

We – EPG Group the bigge EPT Chain and agricultural gearbox manufacturing unit in China with 5 distinct branches. For much more details: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828

EPT Sprocket Seat Lock Plate & Screw EPT Parts for XIHU (WE EPT LAKE) DIS. JL110-Oumurs

Attribute:

EPT CODE 2246305711
Fit for XIHU (WE EPT LAKE) DIS. JL110
Bundle With Specific Box or Tailored
Delievery fifteen~thirty Operating Times

EPT Aftermarket Spare Parts EPT offer you for:

Massive Engine Brand name: HARLEY DAVIDSON, BMW, DUCATI, KAWASAKI, KTM, TRIUMPH, CFMOTO, SUKADI, HYOSUNG, POLARIS, and so forth.
EPT EPT Brand: HONDA, YAMAHA, SUZUKI, BAJAJ, KEEWAY, KYMCO, S EPT , TVS,
LONCIN, ZONGSHEN, SHINERY, HangZhou, DAYANG, XIHU (WE EPT LAKE) DIS.N, XIHU (WE EPT LAKE) DIS., HAOJIN, HAOJUE, QINGQI, XIHU (WE EPT LAKE) DIS.,
PIAGGIO, PEUGEOT, VESPA, AKT, AYCO, BERA, DAYTONA, Manufacturing facility, GENESIS, GILERA, MOTOMEL,YUMBO, ZANELLA, etc.
Massive Engine Designs: MONSTER, Softail, Dyna, Touring, Sportster, ZX, ZR, ZG, ZZR, GPR, GPZ, NINJIA, VERSYS, DAYTOAN,and many others.
EPT EPT Versions: AX, ACE, AN, AKT, ARN, AYCO, ARSEN, AVENGER, AGILITY,  
BIZ, BWS, BROS, Greatest, BOXER,
CA, CB, CD, CG, CH, CM, CGL,CBF, CBR, CBX, CRF, CRM, CARGO, Customized, CYGNUS,
DS, DL, DR, DUKE, DAKAR, Uncover,
EN, FZ16, FT, FLY, FOX, FAZER, FIDDLE,  
GN, GS, GY6, GSF, GSR, GSX, GSXR,  
HORSE, JL, JH, JOG, JET4, JOYLIE,
LOGIC, LIBERO, MP3, MAX, MBK, MOTARD,
NXR,   OWEN, ORBIT, OUTLOOK,  
PCX, PLATINO, PULSAR, QJ,
RX, RTX, RKS, RE Tricycle, ROCKZ,
SV, SH, SMR, SKUA, Sport, Pace, SILVERBLADE,
TX, TMAX, TITAN, Typhoon, VLM, VICTOR,
WY, WAVE, XY, XT, XV, XV, XCD, XRE,
YB,YP, YBR, YZF, YFM, and many others.

FAQ

1. How shortly can I get the quotation?
Re: The quotation need to be given within 24 hrs .
If it is extremely urgent, p EPT make direct speak to with EPT sales.
 
two. Can EPT do the packages as we need?
Re: Confident for bulk order!.
For other people, we will offer you OUMURS, TWOM or neutral pack for you.

three.What is your delivery time?
Re: Generally fifteen-30 working times for tiny motor or huge engine motorcycles, as effectively as for ATV an UTV when your location buy.
Normally speaking, we sugge EPT that you begin inquiry one months prior to the date you would like to get the goods at your country.

4.What is your payment?
Re: We settle for T/T.
Bulk order can be negotiated.

5.What’s your transportation?
Re: By air or sea(LCL,FCL).
If something else that you want to know ,you should get in touch with us.

six.What is your MOQ?
Re: For the spare areas and accessories, it would depend on the thorough products.

Thx for looking through EPT introduction.
To know more about OUMURS, p EPT kindly visit our internet site:  

 

The use of first products manufacturer’s (OEM) part quantities or logos , e.g. CASE® and John Deere® are for reference needs only and for indicating item use and compatibility. Our organization and the detailed substitution components contained herein are not sponsored, approved, or produced by the OEM.

Motorcycle  made in China - replacement parts -  in Enugu Nigeria  Sprocket Seat Lock Plate & Screw Motorcycle Parts for Jialing Jl110-Oumurs with ce certificate top quality low price

Motorcycle  made in China - replacement parts -  in Enugu Nigeria  Sprocket Seat Lock Plate & Screw Motorcycle Parts for Jialing Jl110-Oumurs with ce certificate top quality low price

Motorcycle  made in China - replacement parts -  in Enugu Nigeria  Sprocket Seat Lock Plate & Screw Motorcycle Parts for Jialing Jl110-Oumurs with ce certificate top quality low price